Trusted Water Heater Repair Specialists in Haysville, Kansas

When water heats up, it expands by about 2% to 3%. In homes with a backflow preventer or check valve, this expansion creates severe pressure spikes. A thermal expansion tank absorbs this pressure, preventing leaks and protecting your warranty.

If your water heater is under 10 years old and the problem involves a replaceable component—such as a heating element, thermostat, thermocouple, or relief valve—repair is usually cost-effective. However, if the internal tank has rusted through and is leaking from the base, replacement is necessary.

A pilot light that won't stay lit is usually caused by a faulty or carbon-coated thermocouple, a blocked pilot orifice, a defective gas valve magnet, or poor combustion air intake. Call (877) 583-2437 to have a technician test and replace the thermocouple safely.

A tripped breaker typically signifies a burned-out heating element whose protective casing has cracked, causing an electrical short to ground inside the tank. It can also stem from a malfunctioning high-limit thermostat switch.

A cold water sandwich happens when hot water left in the pipes is followed by a brief surge of unheated water while the flow sensor triggers the burner. Installing an internal or external recirculating buffer tank eliminates this issue completely.